Small cap power: CIMT

[pinoleropuro]

is it possible that people that have been kicked out of this forum gone out and bash this boards holdings?
if I am out of the park with this one please ingnore the question.
just a thought.

[tokyopua]

I take the time now to rate every negative post on YMB in the CIMT board that I see as one star.  And even that takes a lot of time as there are so many negative posts.  I also rate the rare occassional positive posts as 5 stars.  I know that some people have their settings to show only posts with 2 stars or more, so hopefully this helps somewhat.

It could also be a disgruntled former employee of CIMT who is posting so many negative things, because occasionally they posts some fairly detailed information about the stock.   But you are right, it could also be a former board member or a paid basher.  Whoever it is, I do believe they have managed to bring down the stock price because the stock has such a low float and is a microcap.  If David is right long term, than those here who still havent bought the stock should see that as a gift from heaven, because now the potential gain per the valuation model is over 700% lol! 

It is hard to see the stock with the most potential also be the biggest loser in the portfolio.  Luckily David posts everyday and helps give us long term investors the strenght to hang on.  Without that I would have followed my usual pattern and been out already lol.  As David says, I will continue to hold CIMT. 

[Se7en]

Cimatron to Exhibit New CAM and 5-Axis Capabilities at EMO
Thursday July 26, 9:00 am ET
CAM Applications and Features Include Flexible 5-Axis Programming, NC-Preview, Automated Drill, and Micro Milling Support

GIVAT SHMUEL, Israel, July 26 /PRNewswire-FirstCall/ -- Advanced CAM capabilities recently released by Cimatron (NASDAQ: CIMT - News) will be demonstrated at the EMO tradeshow in Hanover, Germany, 17-22 of September, 2007.


Cimatron's advanced CAM capabilities enable toolmakers and manufacturers to achieve top-quality surfaces using a rich set of 2.5-5-Axis roughing, finishing, and drilling strategies. Cimatron CAM solutions are tightly integrated with the design applications as part of the CimatronE CAD/CAM suite, enabling toolmakers and manufacturers to streamline design and manufacturing cycles.

New capabilities in the recently released version 8 of CimatronE include NC-Preview, Automated Drill, and advanced 5-axis machining options.

5-Axis Machining

CimatronE version 8 features new enhancements to the 5-Axis Production application, delivering higher performance and better user control. Exact simulation of tool path and machine kinematics ensures the most reliable results.

Cimatron 5-Axis Production provides the programmer with complete control to influence any aspect of the toolpath, enabling even the most complex parts to be machined safely and effectively. Integrated CAD capabilities for surfacing are built into the application, facilitating on-the-fly design changes for concurrent engineering and efficient change management.

"Using Cimatron's 5-Axis Production has helped us successfully launch a new product. Things are going so well we are looking at buying another 5-Axis machine to help us fill the high demand" says Steve Hamrick, of Regal Prototypes Inc, USA.

Cimatron's 5-Axis solution also includes a rich set of applications to support streamlined common 5-Axis machining tasks such as impellers, turbine blades, electrodes, and engraving. To smooth the integration of the application into the 5-Axis manufacturing environment, Cimatron provides an extensive selection of post-processors for most machines and controllers in the market.

NC-Preview

Cimatron's NC-Preview provides unique decision-support capabilities that dramatically shorten the NC programming cycle. In a matter of seconds and before the actual toolpath is calculated, NC-Preview provides a visual presentation of the approximated outcome of the toolpath. With clear understanding of remaining stock, extra material, and the tool length required, programmers are able to optimize machining strategies and eliminate any potential errors early in the process.

Automated Drill

Cimatron's new Automated Drill delivers adaptive, accurate, and easy-to-use drilling functionality for applications ranging from plate machining to 5-axis production and gun drilling. It automatically detects both geometric and non-geometric hole properties, tracks remaining stock, and assigns the appropriate drilling sequence. Automated Drill allows users to define new drilling sequences on-the-fly and save these sequences for future use. Hundreds of holes can be recognized in seconds, reducing drill programming time by up to 90%.

Micro-Milling

Cimatron is the first CAD/CAM software to support micro-milling. Cimatron's unique algorithm and corresponding set of NC tools enable effective scaling of jobs to the micro environment, while continuing to ensure the superior accuracy and surface quality.

With built-in strategies for high-speed cutting and other machining functions optimized for micro-milled surfaces, Cimatron NC enables manufacturers and tool makers to achieve superb surface quality with tolerance as tight as 0.0001mm and using cutting tools with diameters down to 0.1mm.

"We have been serving tool makers and manufacturers for more than two decades," said Danny Haran, Cimatron's President and Chief Executive Officer. "The growing demands for accuracy, cost control, and speed of delivery present manufacturers with new challenges. We continue to provide advanced technologies and solutions that enable manufacturers and tool makers to adopt new strategies and step up to these challenges."

The 2007 EMO trade fair will take place in Hanover, Germany, The latest products and services for the metalworking industry will be on display, with special emphases on cutting, splitting, milling and metal forming machine tools, manufacturing systems, precision tools, automation components, computer technology, industrial electronics and accessories. More details can be found at http://www.emo-hannover.de/homepage_e.

Visit Cimatron at EMO, September 17-22, 2007

Hall 6, stand K18

http://biz.yahoo.com/prnews/070726/ukth045.html?.v=3

[phabrux]

When will the earning be release for CIMT?

I want to jump in before then.

Thanks

[Se7en]

When will the earning be release for CIMT?

I want to jump in before them.

Thanks

Probably around mid August ...

[phabrux]

When will the earning be release for CIMT?
I want to jump in before then.
Thanks

Probably around mid August ...

Se7en,

I just read from yahoo
that this Israel  Company first Quarter 07  was release the 21 Mai 2007 at 01:01 am(ET)

Thats match your date if you add 3 months from 21 Mai

Thanks again Se7en.

[terainvestment]

I think this is a great moment to jump in CIMT and GSB as well.
Market is very down and buying the dips and the panic selling is a rewarding action.

We will see our stocks up again very soon.

[pinoleropuro]

We will see our stocks up again very soon.

Man, I hope you're right.
if I at least brake even for the year I'll be ok. 

but if it goes eve a little higher than I'll be really happy. 

[David Randolph]

Good morning, thanks for your comments and posting the news

CIMT rose a bit yesterday (the only one of the Main rising), and today there was a press release out (thanks Se7en) that may help the stock pushing some more to the upside and hopefully make a bullish breakout above its short term descending trendline, which for today will be sitting at $2.10.

The press release just emphasizes the new capabilities of the CimatronE version 8 product ...

• Cimatron to Exhibit New CAM and 5-Axis Capabilities at EMO
PR Newswire (Thu 9:00am)

... and says the company will showcase it at a fair in Germany, in September 22nd.

I'll keep holding CIMT.

[David Randolph]

CIMT didn't fall over the last couple of days, in fact, it even rose a bit. I guess this is a clue that every potential seller at current levels, already sold, and therefore the only way should be up. The stock is trading at 10 times earnings and less than half of annual revenues. I'll keep holding CIMT.

[kpunarc]

Cimatron's Q2 2007 Results Release Scheduled for August 7th After Markets Close Conference Call Scheduled for August 8th, 2007 at 09:00 EST

GIVAT SHMUEL, Israel, July 30, 2007 /PRNewswire-FirstCall via COMTEX/ --
Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM
solutions for the toolmaking and manufacturing industries, announced today that
it will be releasing its second quarter 2007 results on Tuesday, August 7th,
2007, after markets close.

The Company will also be hosting a conference call on August 8th, 2007, at 09:00
EST, 16:00 Israel time. On the call, management will review and discuss the
results, and will also be available to answer questions by investors.

To participate, please call one of the following teleconferencing numbers.
Please begin placing your calls at least 5 minutes before the conference call
commences.

USA: +1-888-668-9141

Israel: 03-9180688

International: +972-3-9180688

For those unable to listen to the live call, a replay of the call will be
available from the day after the call under the investor relations section of
Cimatron's website, at: www.cimatron.com

About Cimatron

With more than 20,000 installations worldwide, Cimatron is a leading provider of
integrated, CAD/CAM solutions for mold, tool and die makers as well as
manufacturers of discrete parts. Cimatron is committed to providing
comprehensive, cost-effective solutions that streamline manufacturing cycles,
enable collaboration with outside vendors, and ultimately shorten product
delivery time. Cimatron's cutting-edge CAD/CAM solutions are widely used in the
automotive, medical, consumer plastics, electronics, and other industries.

Founded in 1982, Cimatron is publicly traded on the NASDAQ exchange under the
symbol CIMT. Cimatron's subsidiaries and extensive distributor network are
located in over 35 countries to serve customers worldwide with complete pre- and
post-sales support. For more information, please visit http://www.cimatron.com.

Safe Harbor Statement

This press release includes forward looking statements, within the meaning of
the Private Securities Litigation Reform Act Of 1995, which are subject to risk
and uncertainties that could cause actual results to differ materially from
those anticipated. Such statements may relate to the company's plans, objectives
and expected financial and operating results. The words "may," "could," "would,"
"will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and
similar expressions or variations thereof are intended to identify
forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of the future performance and
involve risks and uncertainties, many of which are beyond the company's ability
to control. The risks and uncertainties that may affect forward looking
statements include, but are not limited to: currency fluctuations, global
economic and political conditions, marketing demand for Cimatron products and
services, long sales cycle, new product development, assimilating future
acquisitions, maintaining relationships with customers and partners, and
increased competition. For more details about the risks and uncertainties of the
business, refer to the Company's filings with the Securities and Exchanges
Commission. The company cannot assess the impact of or the extent to which any
single factor or risk, or combination of them, may cause. Cimatron undertakes no
obligation to publicly update or revise any forward looking statements, whether
as a result of new information, future events or otherwise.

    Contact:

    Ilan Erez, Chief Financial Officer
    Cimatron Ltd.
    Tel: +972-3-531-2121
    E-mail: [email protected]

    Yael Nevat,
    Commitment-IR.com
    Tel: +972-9-714-8866, +972-50-762-6215
    E-mail: [email protected]


SOURCE Cimatron Ltd

CONTACT:          Contact: Ilan Erez, Chief Financial Officer, Cimatron Ltd., Tel: +972-3-531-2121,

                  E-mail: [email protected]; Yael Nevat, Commitment-IR.com, Tel: +972-9-714-8866,

                  +972-50-762-6215, E-mail: [email protected]

[pinoleropuro]

in these threads I have heard that when the results are given in the beginning of the week and early in the morning its usually indicative of good news and vice versa.
hopefully after market close doesn't mean bad Q2 results are coming!

[Se7en]

The CC is early in the morning on the next day ... 

[pinoleropuro]

 
Thanks. than I really welcome the news!

[tokyopua]

I took this opportunity to PUMP on Yahoo Message boards today.  I feel like in addition to the news it helped.  The key is to not pump in reply to any negative post, but just to keep posting new threads with positive titles.  We all know CIMT is undervalued, so if you want to help the stock price, stop by YMB and help smap that fool basher!